Suche
• Data logger programming • Including wiring scheme
Service includes: • Inspection • Inspection report • Subsequent to an inspection, the Client can decide if the sensor shall receive a Certified Maintenance and Refurbishment Service or, if needed, repair.
For Thies and Vector Instruments (Windspeed Ltd.) wind vanes: • Maintenance and inspection • Inspection report • Authorised refurbishment • Exchange of bearings, O-rings, sealings • Certificate • Authorisation seal
For Thies Ultrasonic Anemometers: • Inspection and Checkup • Verification of measurements and configuration • Inspection report • Certificate
For Thies and Vector Instruments (Windspeed Ltd.) wind vanes: • Repair (sensor specific) • Maintenance • Authorised refurbishment • Exchange of bearings, O-rings, sealings • Certificate • Authorisation seal • The repair service depends on the individual sensor defects and conditions. A sensor specific offer will be made based upon an inspection report.
For Thies and Vector Instruments (Windspeed Ltd.) anemometer: • Maintenance and Inspection • Authorised refurbishment • Exchange of bearings, O-rings, sealings • Certificate • Authorisation seal • Inspection report
For Thies and Vector Instruments (Windspeed Ltd.) anemometer: • Repair (sensor specific) • Maintenance and inspection • Refurbishment • Certificate Scope & costs for repair depend on the individual sensor defects & conditions. A sensor specific offer will be made based upon inspection.
• CR1000X with custom ProfEC Ventus design label • Once powered up, the measurement automatically starts • Calibration certificate (standards traceable to U.K.A.S accreditation service) • 16x analogue single-ended or 8 differential Analog Inputs, 10x pulse counters, 8x digital IN/OUT (configurable), 4x analogue voltage (switched excitation mode or switched regulated voltage supply), 2x switched 12V • RS232, CS I/O PORT to CSI peripherals, USB, Ethernet (LAN) port, Wi-Fi (optional module) • 4 Mbytes battery-backed SRAM + 72 MB flash memory, expandable to 8 GB • Surge, Electrostatic Discharge and Lightning Protection for all critical Inputs and Outputs • Standard operating range of -40° to +70°C (optionally extended: -55° to +85°C)
{{.}}
{{{.}}}