Suche
Aktueller Filter
• IEC and MEASNET conform lightning arrestor • 30° protection umbrella • Deep grounding mast anchors • Basic surge, overvoltage and overload protection
• Galvanic separation of all sensors from measurement mast structure • Galvanic separation of the masurement system & control unit from measurement mast structure incl. deep grounding rod • Galvanic separation of the power supply system from measurement mast structure • Individual earthing of lightning arrester (copper conductor A ≥ 50mm2) and deep grounding rod • Individual grounding of mesurement mast • Increased surge, overvoltage and overload protection
• Ground lighting belt 3x12m long (30mm width, 2mm thick) • Deep grounding rods connected to 3 belts • Franklin spike (copper) on top of lightning rod • ~45° protection umbrella • All deep grounding rods embedded in humidity absorbents to decrease resistance • Yielding low system resistance • Extensive surge, overvoltage and overload protection
• Surge protection (over-voltage and -currency) module (1 line or signal) • Protection for single input channel • Max. continuous voltage, Uc (DC) 42 V • Fuse, max. 0.5 A
• Surge protection (over-voltage and -currency) module (1 double or 2 single wires) • Protection for single input channel • Max. continuous voltage, Uc (DC) 42 V • Fuse, max. 0.5 A
• Surge protection (over-voltage and -currency) module for analogue signals • Protection for single input channel • Max. continuous voltage, Uc (DC) 42 V • Fuse, max. 0.5 A
• Surge Protection Premium for Power Supply Lines • Max. continuous voltage, Uc (AC) 300 V • Fuse, max. 16 A
• Compact outdoor 5MP resolution, day/night, fixed bullet camera covering 30m with power-efficient IR LED technology • Resolution of 3072x1728 to 160x90 • Video motion detection, active tampering alarm, shock detection and corridor format • Audio mic/line in, I/O for alarm/event handling and memory card slot for optional local video storage • Power over Ethernet IEEE 802.3af/802.3at Type 1 Class 3 • Operating conditions: -40 °C to 60 °C and 10–100% RH
• LI-10-DCW-F • ICAO Typ A Fixed Obstacle Light In combination with PCFL-DC1-TB (optional): • Photocell, user selectable sensitivity: off, 200 lux, 400 lux, 800 lux (default) • Flash controller: steady (default), 20 fpm, 40 fpm, 60 fpm (250 ms flash duration)
• LI-10-DCW-PCFL • ICAO Typ A Fixed Obstacle Light • Integrated photocell, user selectable sensitivity: off, 200 lux, 400 lux, 800 lux • Integrated flash controller: steady, 20 fpm, 40 fpm, 60 fpm (250 ms flash duration)
• LI-32-DCW-F • ICAO Typ B Fixed Obstacle Light • FAA Advisory L-810 Light Unit In combination with PCFL-DC1-TB (optional): • Photocell, user selectable sensitivity: off, 200 lux, 400 lux, 800 lux (default) • Flash controller: steady (default), 20 fpm, 40 fpm, 60 fpm (250 ms flash duration)
• LI-32-DCW-PCFL • ICAO Typ B Fixed Obstacle Light • FAA L-810 Light Unit • Integrated photocell, user selectable sensitivity: off, 200 lux, 400 lux, 800 lux • Integrated flash controller: steady, 20 fpm, 40 fpm, 60 fpm (250 ms flash duration)
• MI-ACWCCVGAM • ICAO MI Typ B/C Red fixed or flashing obstacle light • FAA L-864, L-885 Light Unit • Integrated photocell, fault monitoring and GPS synchronization • Integrated flash controller: 20/30/40/60 fpm
• MI-ICAO-DC1244-2KR-IR-XX • ICAO MI Typ B/C Red fixed or flashing obstacle light • NVG compliant • Integrated photocell, fault monitoring, GPS synchronization, and dry contact alarm relay • Built-in cold climate version • Integrated flash controller: 20/30/40/60 fpm
• Flat surface horizontal mounting sets • Stainless steel
• Vertical pipe mounting set: pipe min. diameter 40 mm, max. diameter 150 mm • Stainless steel
• LI-50-DC-IR-GAM • Integrated Infrared • Isolated RS-485 • Both stand-alone (incorporated alarm signal) and ModBUS operations available • Smart Heater • Operating Voltage: 10-60 VDC
• LI-32-DC-IR-GAM • Integrated Infrared • Isolated RS-485 • Both stand-alone (incorporated alarm signal) and ModBUS operations available • Smart Heater • Operating Voltage: 10-60 VDC
• Can drive several light units LI-xx-DCW-F • Flash controller with photo cell, incl. overvoltage protection • Flashing rate: steady/20/40/60 per minute; duration: 250 ms • Threshold sensitivity: 200/400/800 lux
• Fits to Thies First Class sensors (anemometer and wind vanes) • Galvanic separation of sensor from boom & met mast structure • Druable POM thermoplastic • UV resistant
• Fits to Thies Compact sensors (anemometer and wind vanes) • Galvanic separation of sensor from boom & met mast structure • Druable POM thermoplastic • UV resistant
• Fits to all Vector Instruments sensors (anemometers, wind vanes and several others) that use a type 405 or 405/27P mounting adaptor • Galvanic separation of sensor from boom & met mast structure • Druable POM thermoplastic • UV resistant
• Fits to WindSensor anemometer P2546A-OPR and P2546C-OPR • Galvanic separation of sensor from boom & met mast structure • Druable POM thermoplastic • UV resistant
{{.}}
{{{.}}}
