Suche
Aktueller Filter
• Measurement range T: -30...70 °C • Measurement range rH: 0...100 %rH • With membrane filter for use outdoors, protects againsts aerosols • Factory calibration
• Measurement range T: -30...70 °C • Measurement range rH: 0...100 %rH • Fine-pored sintered filter made from high-grade steel, protects the sensor against high air speeds and dusty conditions • Factory calibration
• Temperature: Range: -50...50 °C Output: 0...1 V Accuracy: ±0.2 K • Humidity: Range: 0...100 % rH Output: 0...1 V Accuracy: ±2 % rH • Factory calibration certificate in accordance to EN 10 204 - 2.2 • Operating voltage: 6...30 VDC
• Extended measurement range T: -40...60 °C • Measurement range rH: 0...100 %rH • Factory calibration
• Measurement range T: -80...60 °C • Measurement range rH: 0...100 %rH
• Measurement range T: -40...60 °C • Measurement range rH: 0...100 %rH
• Measurement range T: -40...80 °C • Measurement range rH: 0...100 %rH
• CS241 • Pt-1000 • Accuracy: ± (0.15 + 0.002T)°C • Uncertainty: ± 0.3° to 0.4°C when using CR1000X or PV1000X • Operating temperature: -40° to +150°C • Compliant with IEC 60751 • Factory Calibrated
• HygroVUE10 • Sensing element: SHT35 • Operating temperature: -40° to +70°C • Operating humidity: 0 to 100%RH • Compatible with PV/CR1000X, PV/CR1000Xe and other models (see datasheet for more precise information)
• ilac-MRA accredited calibration • DAkkS accredited calibration • Compliant to recommendations of FGW TR6, IEC and MEASNET • Incl. calibration certificate
• ISO conform calibration by accredited Calibration Laboratory • Compliant to recommendations of FGW TR6, IEC and MEASNET • Incl. calibration certificate
• Measurement range T: -30...70 °C • Factory calibration
• Measurement range T: -40... +85°C • Measurement range rH: 0...100 %rH • Measurement range P: 300...1200 hPa • Electrical output: 0...1V; 0...10V; 4...20mA • Serial output: RS485, Half-duplex 8N1 (Baud rate configurable)
• Protects the measuring element against high wind speeds (> 5 m/s) and increased dust exposure • Required for exposed operating environments • Dimensions: Ø 20 x 25m m • Material: Stainless steel • Fits following models: 1.1006.54.080 1.1006.54.081 1.1006.54.740 1.1006.54.741 1.1006.54.760 1.1006.54.761 1.1006.54.780 1.1006.54.781
• Weather housing for Vaisala HMP 155 Temperature - humidity sensors HMP110
Lufft WS300-UMB • Pressure: 300 … 1200 hPa • Temperature: –50 … 60°C • Relative Humditiy: 0 … 100 %RH • Operating power consumption: 4 … 32 V • Digital output: RS485, 2-wire, half-duplex • Communication protocoll: UMB-Binary, UMB-ASCII, SDI-12, MODBUS • Protection type housing: IP66
Campbell Scientific CS211 • Low-power, smart sensor designed to monitor temperature, humidity levels and door openings inside enclosures • The CS211 uses an optical sensor and the LED to detect if the enclosure door is open or closed • Temperature: • Measurement range: –40 … +60 °C • Accuracy: ±0.4 °C • Relative humidity: • Measurement range: 0 … 100 % RH • Accuracy: ± 3 % RH (10 … 90 % RH at 25 °C) • Supply voltage: 7 to 28 VDC • Average current consumption: < 100 µA • Start up time: 3 s • SDI-12 direct sonnection to a Campbell Scientific data logger • Dimensions: 80 x 59 x 15 mm
• Includes mounting of sensor-specific connectors / plugs / jacks • Sensor-specific wiring scheme included • Line-to-line calibration according to IEC, MEASNET and FGW recommendations • Labelling provided for easy plug&play installation on site
• LiYCY (TP) BK • Manufactured with special PVC-based compound insulation and cores twisted to pairs • Includes mounting of sensor-specific connectors / plugs / jacks • Sensor-specific wiring scheme included • Line-to-line calibration according to IEC, MEASNET and FGW recommendations • Labelling provided for easy plug&play installation on site
{{.}}
{{{.}}}