Suche
Aktueller Filter
• Silizium-Solarstrahlungssensor • Solarzelle: Monokristallines Silizium (50 mm x 33 mm) • Protokoll: M&T (Typ -MT), MODBUS RTU (Typ -MB) • Typische Messungenauigkeit : ±0.4 W/qm ± 1.6% • Ausgangssignal: 0 - 10V für 0 - 1.500W/m² • Arbeitstemperatur: -35°C bis 80°C
• Silizium-Solarstrahlungssensor Si-V-10TC-T • Solarzelle: Monokristallines Silizium (50 mm x 33 mm) • mit Temperaturfühler • Protokoll: M&T (Typ -MT), MODBUS RTU (Typ -MB) • Typische Messungenauigkeit : ±0.4 W/qm ± 1.6% • Ausgangssignal: 0 - 10V für 0 - 1.500W/m² • Arbeitstemperatur: -35°C bis 80°C
• Measuring range: 0 to 2,000 W/m² • Sensitivity: 60 to 100 μV/W/m² • Spectral range: 400 to 1,100 nm • Output signal: 0 to 20 mV; 4 to 20 mA (with extra module) • Operating temperature: -30°C to +70°C • Self-powered • IP 67
• Maximum irradiance: 4,000 W/m² • Sensitivity: 4 to 10 μV/W/m² • Spectral range: 300 to 2800 nm • Output signal: 0 to 20 mV; 4 to 20 mA (with extra module) • Operating temperature: -40 °C to +150 °C • Self-powered • IP 67
• Maximum irradiance: 4,000 W/m² • Spectral range: 285 to 2800 nm • Analogue output (-V version): 0 to 1 V • Analogue output (-A version): 4 to 20 mA • Operating temperature: -40°C to +70°C • Supply Voltage: 5 to 30 V • IP 67
• The CMP21 is a high performance research grade pyranometer • Maximum operational irradiance: 4,000 W/m² • Sensitivity: 7 to 14 μV/W/m² • Spectral range (20 % points): 270 to 3000 nm • Spectral range (50 % points): 285 to 2800 nm • Operating temperature: -40°C to +80°C • IP 67
• DustIQ monitors the loss of light transmission caused by dust, sand, pollen, or any other particles on PV panels • Transmission Loss (TL) range: 0 to 50 % • Transmission loss measurement accuracy: ± 0.1 of reading ± 1% (after local dust calibration) • Ambient working temperature: -20 to +60 °C • Communication: Modbus over 2-wire RS-485 • Power: 12 to 30 V, 70 to 200 mA; < 2 W • Power consumption < 2.5 Watt • IP 65
• Sensor range: 0 W/m² to 3000 W/m² • Spectral range: 400 to 1100 nm • Incl. calibration certificate • For Global Horizontal Irradiance (GHI) measurements (W/m2)
• Spectral range: 360 to 1120 nm (wavelengths where response is 10% of max) • 0...2000 W m-2 (full sunlight ≈1000 W m-2) • Incl. calibration certificate • Accuracy: ±5% for daily total radiation • Self-powered • For Global Horizontal Irradiance (GHI) measurements (W/m2)
• CS241 • Pt-1000 • Accuracy: ± (0.15 + 0.002T)°C • Uncertainty: ± 0.3° to 0.4°C when using CR1000X or PV1000X • Operating temperature: -40° to +150°C • Compliant with IEC 60751 • Factory Calibrated
• ISO 9060 ‘Second Class’ compliant • Measurement range: 0 W/m² to 2000 W/m² • Spectral range: 305 nm to 2800 nm • Incl. calibration sheet• For Global Horizontal Irradiance (GHI) measurements (W/m2) • Self-powered
• ISO 9060: First Class • Measurement range: 0 W/m² to 3000 W/m² • Spectral range: 285 to 3000 nm • Incl. calibration sheet • For Global Horizontal Irradiance (GHI) measurements (W/m2) • Self-powered
• ISO 9060: First Class • Measurement range: 0 W/m² to 3000 W/m² • Spectral range: 305 to 2800 nm • Incl. calibration sheet • For Global Horizontal Irradiance (GHI) measurements (W/m2) • Self-powered
• Most accurate digital secondary standard pyranometer available • ISO 9060: Secondary Standard • Measurement range: 0 W/m² to 4000 W/m² • Spectral range: 285 to 3000 nm • Incl. calibration sheet (traceable to WRR) • For Global Horizontal Irradiance (GHI) measurements (W/m2) • Sunshine duration (optional)
• ISO 9060: Secondary Standard • Measurement range: 0 W/m² to 4000 W/m² • Spectral range: 285 to 3000 nm • Incl. calibration sheet (traceable to WRR) • For Global Horizontal Irradiance (GHI) measurements (W/m2) • Sunshine duration (optional) • With Pt100 (T1 version) or 10 kOhm thermistor (T2 version) • With heating
• ISO 9060: Secondary Standard • Measurement range: -400 W/m² to 4000 W/m² • Spectral range: 285 to 3000 nm • Incl. calibration sheet (traceable to WRR) • For Global Horizontal Irradiance (GHI) measurements (W/m2) • Sunshine duration (optional)
• For all Hukseflux pyranometers: 1 x pyranometer, horizontal or tilted
• For all Hukseflux pyranometers: 1x horizontal and 1x tilted pyranometer
• For all Hukseflux pyranometer models • For mounting at round tube • For horizontal and tilted pyranometer levelling and mounting
• Includes mounting of sensor-specific connectors / plugs / jacks • Sensor-specific wiring scheme included • Line-to-line calibration according to IEC, MEASNET and FGW recommendations • Labelling provided for easy plug&play installation on site
• LiYCY (TP) BK • Manufactured with special PVC-based compound insulation and cores twisted to pairs • Includes mounting of sensor-specific connectors / plugs / jacks • Sensor-specific wiring scheme included • Line-to-line calibration according to IEC, MEASNET and FGW recommendations • Labelling provided for easy plug&play installation on site
{{.}}
{{{.}}}
