Kommunikation

• GSM / GPRS / Edge: quadband / class 10 / class 10
• Voice / Fax / SMS and Data
• Quad Band: 850 / 900 / 1800 / 1900 MHz
• TCP / UDP / FTP / HTTP / SMTP / POP3 / SNMP / SSL
• RS232
• 1x digital input, 1x digital output

• M1003GXT00
• GSM / GPRS / Edge: quadband / class 10 / class 10: 850 / 900 / 1800 / 1900 MHz
• HSDPA (WCDMA): 850/1900 MHz
• gpsOneXTRA™, A-GPS
• RS232, USB 2.0, 1x digital input, 2x digital output

• M1003GXT02
• GSM / GPRS / Edge: quadband / class 10 / class 10: 850 / 900 / 1800 / 1900 MHz
• HSDPA (WCDMA): 900/2100 MHz
• gpsOneXTRA™, A-GPS
• RS232, USB 2.0, 1x digital input, 2x digital output

• M1003GXT04
• GSM / GPRS / Edge: quadband / class 10 / class 10: 850 / 900 / 1800 / 1900 MHz
• HSDPA (WCDMA):  800/850/2100 MHz
• gpsOneXTRA™, A-GPS
• RS232, USB 2.0, 1x digital input, 2x digital output

• CDMA2000
• gpsOne™
• RTT 800/1900 MHz
• TCP / UDP / FTP / HTTP / SMTP / POP3 / SNMP / SSL
• RS232
• USB 2.0
• 2x digital input 

• PHS8 GPS Terminal
• Cinterion® PHS8-P embedded
• Quadband GSM (850/900/1800/1900 MHz)
• 3G UMTS/HSPA
• TCP/IP stack access via AT commands
• Supply voltage range: 10-60V

• Teltonika RUT955 Industrial Cellular Router 4G LTE
• Dual-SIM cellular connection
• Four Ethernet ports and Wi-Fi
• Supports RS232, RS485, USB interfaces, Modbus, SNMP, TR-069, NTRIP, and MQTT protocol
• Input voltage range of 9-30 VDC

• Teltonika RUT241 Industrial Cellular Router 4G LTE
• Two Ethernet ports and wireless interface with Hotspot functionality
• Compatible with RMS
• Input voltage range of 9-30 VDC

• Teltonika RUT260 Industrial Cellular Router 4G LTE
• Two Ethernet ports and wireless interface with Hotspot functionality
• Compatible with RMS
• Input voltage range of 9-30 VDC

• Uni-directional antenna, 11 dBi amplifying
• For remote transmission in weak networks
• GSM/GPRS/EDGE/UMTS/WLAN/LTE
• 800-2500 MHz

• Inmarsat BGAN
• For IP SCADA and M2M
• GPS
• Ethernet connection (RJ45)
• USB–Type B 
• RS-232 (DB9)
• External Antenna

• NPort 5150 Serial Device Servers
• Designed to make serial devices network-ready in an instant
• 1x 10/100 Base T(X) Port (RJ45 connector)
• Real COM and TTY drivers for Windows, Linux and macOS
• Configurable by Telnet, web browser, or Windows utility
• Small size for easy installation
• Operating/Storage temperature: -40°C to 75°C
• 5 years warranty

• EKI-2541SI
• 1 x 100 Mbps Single-mode 1310 nm 30km SC type fiber port
• Half/Full duplex flow control
• 1 x 10/100 Mbps Ethernet port with RJ45 connector
• Redundant 12-48 VDC power input